the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Feedback in XBox in Escalade 2002


Post ReplyPost New Topic
< Prev Topic Next Topic >
genovese45 
Member - Posts: 1
Member spacespace
Joined: February 14, 2005
Location: United States
Posted: February 14, 2005 at 7:40 PM / IP Logged  
I have the Pioneer AVH P6600dvd in my 2002 Escalade and when I hook up an XBox to the brain.  I am getting feedback in the sound and video.  I have the inverter wired to the ignition and still no luck.  I know its not the brain because when I extend an extension cord from the home to the car there is no feedback.  When I hook it into the inverter the feedback starts.  If I hold the video jacks coming out of the brain at a certain angle it goes away.  Someone on another forum told me that I need a filter and that I have a ground loop.  I dont know what that is or where to put the filter or where to even buy the filter.  Please help.  Thanks in advance.
oonikfraleyoo 
Gold - Posts: 1,069
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2005
Location: United States
Posted: February 14, 2005 at 10:55 PM / IP Logged  
You can go to wal-mart or autozone or anywhere with a minimal car audio section and get a ground loop filter. I'm not positive thats your problem but its a good place to start. You unplug your RCA cables from the brain (just audio not video) and plug the filter in between the two. It's simple. I had an xbox in my old truck and I could never get the thing to sound right. During gameplay it was ok but while playing music from the harddrive it had bad distortion. Never did figure it out, but your problem sounds a little different.
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.
oonikfraleyoo 
Gold - Posts: 1,069
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2005
Location: United States
Posted: February 14, 2005 at 10:59 PM / IP Logged  
wait i just reread your post and I'm not sure if you were talking about video or audio feedback, anyway put the filter on the RCA that has the problem. I think a ground loop filter will work on video. Am I right guys?
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 3, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer