screen pressure

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / screen pressure (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Markland556

Copper - Posts: 75

Joined: March 18, 2005

Location: United States

Posted: June 01, 2005 at 11:41 PM / IP Logged

im putting in 2 17" LCD's in my trunk. I have 3 JL 12W3's in there, all i wanna know is if the screens will be damaged by the SPL created in the trunk?? I dont have the subs in yet and no way to test the actual SPL, i just wanna know if its a smart idea to seal off the top section and put some plexi in front of the screens?

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 02, 2005 at 9:26 AM / IP Logged

Pressure, probably not. Vibration, maybe. Would I do it, only in a show car. Monitors in trunks are stupid unless you are parked alot.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Markland556

Copper - Posts: 75

Joined: March 18, 2005

Location: United States

Posted: June 02, 2005 at 8:16 PM / IP Logged

well i have these 2 monitors and i wanna play Halo 2 against each other during my luch period (still in skool). If there was enough room inside my car i would put them in there. But idk.... just wont work, its a Mercedes 300E 86'

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

screen pressure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.