AVIC-2, PS2, plus 2 monitors

I have one of those monitors and it has a really nice picture I was very pleased with the price. Anyway... from the monitors you can just use regular RCAs. I had a cheap set that I slpit in half and ran from the video out from the PS2 to the monitors. I also have 2 monitors so I just used a regular Y adaptor/slpiter to split the video signal. Hope that helps you some. oh and although it voids the warranty, you don't need a power inverter to run an old PS2 in the car. Not sure if the newest slim ones are the same, but with the old ones you can take it appart and actually hard wire it to the car. Once you have the board out you will see 4 pins. 2 pins are + the other 2 are -. Pretty self explanitory from there. I wired mine to the ignition and with a switch so I can still turn the PS2 on and off.