05 Ford Excursion, DVD Wire Diagram

blown105 I don't know if you have solved your problem yet but I am in the process of attempting the same result. I replaced head unit with Kenwood DDX8017 and am trying to play video output from kenwood to factory dvd system and play video from factory dvd to kenwood. I am afraid that the harness only contains proprietary audio signals from the factory dvd to the head unit. I have sent requests to both PAC and PIE to see if one of their aux input devices may be able to pull out the audio but as you might know these are designed to get audio in. I was able to find the pinouts of the FORD20 connector that holds the signals we need. You can find it here: http://carstereohelp.net/images/FordWireharness12310201.jpg Four of the wires are proprietary audio and control signals. There are also connection for a CD changer. I am going to test the CD changer signals for audio from the factory DVD. I am also going to test the MONO signals and see by chance if the video is coming over that. Wishful thinking. If I have success findin I will let you know. How did you supply power to the rear dvd? did you use ASYSON in the harness or use a direct line? Here are the pinouts and directions for steering wheel and rear controls. Ford20: Pin# 15 or 14, Lt. blu/red or yel. Ford-Dual: Vehicles with both steering wheel and rear controls. 2 separate interfaces are required If both front and rear controls need to be used together. Front steering wheel = Version 3: Ford20, connect pin#15 or 14, Lt.blu/red to white wire of SWI-X. Rear center console = Version 6: Ford20, Connect pin# 5 to 12 volts accessory. This supplies power to the rear controls. Connect pin# 6 to orange wire of SWI-X.