the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

hooking up a reverse camera


Post ReplyPost New Topic
< Prev Topic Next Topic >
jdiazj1 
Member - Posts: 21
Member spacespace
Joined: July 07, 2005
Location: United States
Posted: April 20, 2006 at 10:02 AM / IP Logged  

hello, i own a 1998 lincoln navigator and interested in hooking up a reverse camera. I have recently installed a carputer with a webcam as a rev cam but ive noticed that everytime that i turn on the cam, it starts to spike the cpu. it goes up to 90% resources so thats why im deciding on using a normal cam. I have purchased this monitor

hooking up a reverse camera -- posted image. 
here is the site with the specs 
the monitor comes with 3 video inputs and one of them is dedicated to a rev cam. also, notice all the power cables, one of them says 'Reverse' and it supposed to take +12v to trigger it to auto switch from VGA to cam input. so, my question is this, where would i find the reverse line in my suv? where is it located where its closest to the front? i know i can just simply tap into the reverse lights cause i believe those run at +12v but i wanted to know where it might be located up front? Also, this is the camera that i will be purchasing and here is a pic of it 

- edited by moderator.  No need to re-post large pictures here, links are more than enough! -

where would u guys recommend me tapping into to power it? should it be on when the car is on or on only when i put it in reverse? If i DO tap into the reverse line for both the +12v for the monitor and for the camera, how should i go about doing it? do i need to get a larger fuse, use an inline fuse for both the line and the cam or what? thank you and sorry for the long post and the pic of the wires. I just wanted for the labels to be visible

jdawg
honda4x4nut 
Member - Posts: 30
Member spacespace
Joined: October 20, 2004
Location: United States
Posted: April 22, 2006 at 2:06 AM / IP Logged  
Ok first find a good spotto mount the camera on the back of the vehicle. Run power and video cable from the camera up to the screen. Find a reverse signal wire either from the dash gauges, under the hood in the fuse panel, or if all else fails...Tap into the backup lamp at the taillight.Run that wire to the blue wire that says REVERSE on your screen also connect the camera positive to that. Ground the camera ground of coarse. Then just connect the video cable into the reverse rca on the unit this should do it
Black 04 Cadillac Escalade EXT- 13 INCH suspension LIFT,37"nitto mud grapplers,22"MC2 Cadillac wheels, 05 touch screen Nav system, backup cam, Headrest and visor monitors and video input on nav system
cook74 
Member - Posts: 4
Member spacespace
Joined: November 27, 2005
Location: United States
Posted: April 22, 2006 at 10:36 PM / IP Logged  
I bought one of those license plate mounted cameras and like it a lot.
Doug;}

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer