Eclipse BEC 105 Back Up Camera on AVIC D2

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Eclipse BEC 105 Back Up Camera on AVIC D2 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

goma29

Member - Posts: 5

Joined: May 11, 2006

Location: United States

Posted: May 11, 2006 at 2:28 PM / IP Logged

I want to install an Eclipse BEC 105 back up camera on my Pioneer AVIC D2. Does anybody knows what wires or aire colors for power and video output? Can I supply 12 volt to the camera? Thank You

doibuy

Copper - Posts: 177

Joined: March 15, 2006

Posted: May 11, 2006 at 7:16 PM / IP Logged

I've done this before, but I can't remember what the wire colors are in the plug. There are four wires in the plug, two are Power and Ground, then the other two are Video and Video Shield. I think they are pretty straight forward. Red = power, Black = ground, Yellow = Video, White = video shied. Like I said, I don't know for sure if these are the correct colors.

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: May 11, 2006 at 9:52 PM / IP Logged

Hi,

I'm pretty sure the Eclipse camera operates off of 6 volts, supplied by the head unit connected to it. Not sure if it would be too happy with 12-14 volts for power though. I do have the color codes for the Eclipse piece at work, I'll try and post tomorrow.

Mark

Ween

Platinum - Posts: 1,366

Joined: August 01, 2004

Location: Illinois, United States

Posted: May 12, 2006 at 10:11 AM / IP Logged

wiring for BEC-105

Yellow Video Signal

Red Camera V+ (6 V)

White Video Gnd

Black Power Gnd

I also measured voltage at red wire to ground with camera connected ~6.2 V

hope this helps

goma29

Member - Posts: 5

Joined: May 11, 2006

Location: United States

Posted: May 12, 2006 at 11:09 AM / IP Logged

I checked the wire colors and confirmed they are as stated by doibuy and Ween. Thank you for all the replies.

goma29

Member - Posts: 5

Joined: May 11, 2006

Location: United States

Posted: May 30, 2006 at 12:09 AM / IP Logged

I just installed the back up camera today and it works perfect. A little bit of braket fabrication, cutting the right size hole for the camera and running the cable. By the way, it was installed on a brand spankin new 06 Honda Odyssey.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Eclipse BEC 105 Back Up Camera on AVIC D2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.