16 pin Gentex mirror connector

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 16 pin Gentex mirror connector (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jaspete

Member - Posts: 1

Joined: October 11, 2006

Location: United States

Posted: October 11, 2006 at 6:42 AM / IP Logged

Can anyone provide information on how to determine where the numbers begin on the 16 pin connector. I do not see any numbers on the connector itself. Does it go right to left and which is the top row vs the bottom row. Thanks.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: October 12, 2006 at 2:15 PM / IP Logged

NNNNNNNNNNNOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!

Find the Gentex thread, it should have all the info you would need.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

mr. mod

Member - Posts: 6

Joined: October 17, 2006

Location: United States

Posted: October 17, 2006 at 8:28 PM / IP Logged

If you shine a bright light down inside the connector mounted to the mirror PCB, you will be able to read the pin numbers. They are really, really small so it may take a little to have the light hit them just right. I don't have a photo to share and since it easy to mix up orientation on the connector it's probably best you look closely and find the numbers, then draw a little diagram to keep them straight.

Back to Top

mr. mod

Member - Posts: 6

Joined: October 17, 2006

Location: United States

Posted: October 17, 2006 at 10:15 PM / IP Logged

I know it's an ongoing topic about Gentex Mirrors. I have done extensive research all over this forum as well as the rest of the net and have come up empty so am hopeful someone can offer definitive answers.

I have the mirror, I understand the pin-out, I tried Mito Corp (no luck).

What is the exact part number and maker of the 16-way connector that plugs into the back of the mirror? I have searched the Tyco (Amp) site, Molex Site, Newark site and still no exact match.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

16 pin Gentex mirror connector

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.