2006 tundra, reverse wire

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 2006 tundra, reverse wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dago52

Member - Posts: 10

Joined: November 22, 2006

Location: United States

Posted: June 23, 2007 at 9:21 AM / IP Logged

Just Installed the DNX-7100 navi system. I am looking for the reverse wire. I thought it was the red and black on drivers kick panel, but that did not work.

Thanks

dago52

Member - Posts: 10

Joined: November 22, 2006

Location: United States

Posted: June 23, 2007 at 11:51 AM / IP Logged

Nevermind, there is 2 RED / black wire in the kick panel. I was connected to the speaker I think, anyway I got it to work. The only thing is I thought it should go into camera mode any time it is in reverse. I have to put it in video mode before the camera will work. Any suggestions.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 tundra, reverse wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.