the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

overhead monitor


Post ReplyPost New Topic
< Prev Topic Next Topic >
subs1000w 
Member - Posts: 4
Member spacespace
Joined: January 29, 2005
Posted: October 09, 2007 at 5:22 PM / IP Logged  

i just recieved this

http://cgi./dll?ViewItem&rd=1&item=130158827984&ssPageName=STRK:MEWN:IT&ih=003

in the mail and it didnt come with instructions and i cant find a modle number or even a brand name to look them up online so i was wondering if anyone knew which wires went to what on the monitor heres a pic of the wires

[IMG]https://i101.photobucket.com/albums/m47/subs1000w/Picture049.jpg[/IMG]

it has a red fused wire i assume is ignition

a black wire that is probobly ground

a yellow femal rca which i assume is video in

a white femal rca which i would think would be audio in but it doent have any speakers

a then black male rca and red male rca which i dont know what they are so if you could tell me that would be great i assume one of them controls the dome light but i dont know thanks

techman93 
Silver - Posts: 591
Silver spacespace
Joined: October 28, 2006
Location: Pennsylvania, United States
Posted: October 09, 2007 at 8:44 PM / IP Logged  
I would power up unit and use some video source such as a DVD player and hook up input and see if you get video feed. You may just have to see what happens when you hook up to it. I guess it has no built in DVD player. Monitor only?
subs1000w 
Member - Posts: 4
Member spacespace
Joined: January 29, 2005
Posted: October 10, 2007 at 11:21 AM / IP Logged  
no the monitor doesnt have a dvd player or speakers but thats fine since im hooking this up to the aux in the radio and a laptop/video games im not to worried about the video in since i would amagine the yellow would be that but im more interested in the dome light working and i just went out and tryed to get continuity from the dome light in the monitor housing to one of the plugs in the harness and couldnt get one accually i mean i got alot almost all the wires had continuity with it so i think what im going to do is cut the wires going to the dome leds and run them separetly to the cars dome light especialy since the cars dome lights are negative triger and i bet the dome lights in the monitor are positive let me know if you have any other sugestions and if what im planing on doing will work thanks

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer