1994 camaro door locks

I have a friends 1994 camaro with factory keyless entry. We are installing a compustar pro cm4000 . door locks say reverse polarity on wiring and other topics indicate they are 5 wire reversal. When i use dmm and probe wires using passenger door lock switch they go to 12 volts. I wired relays to 5 wire reversal diagram and lock will work but unlock wont. am i missing something? Perhaps they are just positive door locks. im confused. Thanks for any helpbat9905

Does this help at all?: Keyless versions: Use RED / black for lock and ORANGE / black for unlock. Both wires are located in the passengers kick panel at the keyless entry module. Do NOT use the orange power wire at the keyless module or door lock switch to power your door lock relays. The passenger switch is the master switch.

Yes . Those are the wires I used . Maybe I just was tired . I'll look over it today . I might pull relays and start over .bat9905