Kenwood DDX7015

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Kenwood DDX7015 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nc1981

Member - Posts: 1

Joined: July 28, 2004

Location: United States

Posted: July 28, 2004 at 9:44 PM / IP Logged

I have purchased a Kenwood DDX7015 double-din HU. I have read many post on here about grounding the wire to bypass the safety feature for the monitor. Most of the post only talk about one wire that i have to ground, this HU has several wires to wire to the parking brake. My question is, do i only have to ground the wire that goes to the parking break? And what do i do, if anything, to the other wires?? Everyone's help will be GREATLY appreciated!!

Brandon

Back to Top

jburk

Member - Posts: 5

Joined: December 27, 2003

Location: United States

Posted: July 30, 2004 at 7:23 PM / IP Logged

I installed my DDX7015 last night. On the small three wire harness, the green and black go to ground if your bypassing the parking break. The yellow goes to constant power (battery). I simplified my install by using the black ground and yellow power wires from the larger wiring harness.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kenwood DDX7015

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.