the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

code alarm pro 1000sx wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
shoult 
Member - Posts: 2
Member spacespace
Joined: September 12, 2009
Location: Tennessee, United States
Posted: September 12, 2009 at 3:14 PM / IP Logged  
I did a stupid thing. I purchased a used 92 Mazda Miata in July (That's Not the stupid part!). I found out it had a non-working Code Alarm Pro 1000sx (I'm sure you can see where this is going already). It no longer chirped, flashed or sirened. I decided I wanted to remove it. I squeezed my overly large body under the dash and proceeded to unhook the brain box with abandon. Of course the car no longer starts and I have NO idea how to hook it back up. There is no wiring diagram on the back of the box and Code Alarm won't answer their phone until Monday.
Besides the three multi-pin plugs (which are reconnected) there are red (fused), black, white and WHITE/ red wires that need to be reconnected. There is also a purple with that has no connector on it and looks as if it never did. There are 7 lugs that these wire could be attached to.
I need help! I am taking this car on a long trip Wednesday and still need to do some minor work on it before I leave.
jim hunter 
Silver - Posts: 351
Silver spacespace
Joined: March 23, 2006
Location: United States
Posted: September 13, 2009 at 11:46 AM / IP Logged  
the white and the WHITE/ red should be the starter wires (which have been cut to run thru this KILL switch connection) tie them together and the car should start with everything else disconnected
shoult 
Member - Posts: 2
Member spacespace
Joined: September 12, 2009
Location: Tennessee, United States
Posted: September 13, 2009 at 2:37 PM / IP Logged  
Thank You! Thank You! Thank You!
With that little bit of information as a safety net I have been able to test, confidently remove, test, remove some more, test, remove it all and test again.
The Code Alarm has now been given a (not so) decent burial and the underside of my dashboard is much cleaner for it!
Once again Jim, THANK YOU!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer