key override all bypass

Home / the12volt's Install Bay / Car Security and Convenience / key override all bypass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

brandenl

Member - Posts: 3

Joined: November 02, 2009

Location: Alberta, Canada

Posted: November 14, 2009 at 10:58 AM / IP Logged

im installing a rs in a 2003 f-150 and i have the key over ride all by pass and i dont know where to find the data in's and out on the truck

branden

Back to Top

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: November 14, 2009 at 10:12 PM / IP Logged

What is the model # of the bypass...? Usually the install manual has all the wiring info...The bypass you have does not require a key to be inserted ...right...?

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Back to Top

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: November 14, 2009 at 10:24 PM / IP Logged

4. WHITE/ lt Green(tx) 3. Gray/Orange(rx) ...Connectors A and C are found 8 inches lower on PATS harness. You have the C connector...Pins 3-4 are the tx and rx wires you need... You can look at this install guide if you are still confused... http://www.idatalink.com/documents/install-guides Look at this model's manual ...ADS-TBSL-FM...6th up from the bottom or so...Might not be the same bypass...but it has all the trucks wiring and locations...

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 15, 2009 at 8:46 AM / IP Logged

On the 03's there is a 4 pin connector to the right of the steering column. I think it's GRAY in color and if you unplug this and thrun the key to the ON position, your theft light will blink fast, this will be the correct connector. If your theft light doesn't blink fast after unplugging it, then it is not the right harness. In the harness you will find the wires listed above by tommy..

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

dswift

Copper - Posts: 396

Joined: March 12, 2007

Location: United States

Posted: November 16, 2009 at 5:04 PM / IP Logged

Get your install guide from www.ifar.ca

That is easy as 123. In= RX out=TX FYI

"dont ground out!"

Back to Top

brandenl

Member - Posts: 3

Joined: November 02, 2009

Location: Alberta, Canada

Posted: November 21, 2009 at 8:31 PM / IP Logged

i got it all done it was a green connector and the problem i had was with the negative while running thanks anyway

branden

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

key override all bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.