the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

comp ft6000as


Post ReplyPost New Topic
< Prev Topic Next Topic >
timelessr1 
Member - Posts: 18
Member spacespace
Joined: April 23, 2008
Location: New Jersey, United States
Posted: February 05, 2010 at 8:06 PM / IP Logged  

I got my alarm installed professionally since i dont have the time anymore to do it myself (also since its freezing here, and i dont have a heated garage) I got a Compustar FT6000AS installed in my 2010 ford f150.  It seems that everything is working perfectly, except one thing. The Passive arming. When i try to activate passive arming (buttons 2+3 fo .5 secs) the remote reads "FAIL" where the time is normally stated. I called the installer, and at first he didnt know why this was doing it, and said, he has to connect to the brain and diagnose. Now this will be the third time i have to bring my car back. He also said that he talked to firsttech and they said that this was a setting that he had to set. Is this true? I would like to know the real answer before I have to drive another 50mins each way to "try" something that might not even be the case.

timelessr1 
Member - Posts: 18
Member spacespace
Joined: April 23, 2008
Location: New Jersey, United States
Posted: February 05, 2010 at 8:24 PM / IP Logged  
Oh, also a Blade-AL interface is being used for the install
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: February 05, 2010 at 9:16 PM / IP Logged  
It is option 1-08 setting 2.
timelessr1 
Member - Posts: 18
Member spacespace
Joined: April 23, 2008
Location: New Jersey, United States
Posted: February 06, 2010 at 9:02 AM / IP Logged  

enice wrote:
It is option 1-08 setting 2.
Option 1-08 setting two i thought just allows the alarm to passively arm AND NOT passively lock.  I want the system to do both. lock and arm, and thatwhen the remote is saying FAIL. I didnt think it was a feature the installer has to turn on.

enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: February 07, 2010 at 12:30 AM / IP Logged  
We are compustar dealers and there are 3 settings...off, passive arming with locking, and passive arming without locking. That needs to be on, thats why it gives you the fail message.
dswift 
Copper - Posts: 396
Copper spacespace
Joined: March 12, 2007
Location: United States
Posted: February 08, 2010 at 6:53 PM / IP Logged  
roger that 1-08-2 will allow the remote to use that feature. Word is like bondo.
"dont ground out!"

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer