the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5704v on 94 lexus


Post ReplyPost New Topic
< Prev Topic Next Topic >
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: January 01, 2014 at 1:06 PM / IP Logged  
Do you have the parking lights connected? You stated the module makes ABOUT 8 clicks. Need to know exactly how many.
The parking lights flashing the number of clicks works better.
Also need to connect the H3/2 RED / white to a constant 12 volt source. This is the input for the H3/7 pink/white output to ignition 2.
See video: http://youtu.be/uq1ETQxMp7M
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
lowriderman234 
Member - Posts: 12
Member spacespace
Joined: December 30, 2013
Location: New Hampshire, United States
Posted: January 01, 2014 at 10:45 PM / IP Logged  
Yes I've tried the key on key off and holding down the control center button but nothing happens.. So I need a total of 3 wires hooked up to a constant 12v? I have only two constant 12v and it's white and WHITE/ red. The alarm part is hooked up to there, so would 3 more wires there be dangerous?
smokeman1 
Platinum - Posts: 1,588
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: September 14, 2009
Location: Wisconsin, United States
Posted: January 02, 2014 at 6:28 AM / IP Logged  
Is your car Automatic or manual?
Yes. H3/2,6, and 9 need to be connected to a constant 12 volt source. If you have two 12 volt wires, just split all of your connection between the two.
Go to the download section and get the Viper 5701 install manual. On page 60 there is a better explanation of how to get into the menus and make changes.
Take the H2/6 Green wire and put it to a chassis ground. This is the (-) Neg door trigger. The brain needs to see it along with the key ON/OFF to get into the menus. It will take a number of tries for you to get it as it can be tricky.
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 11, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer