the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5704v on 94 lexus


Post ReplyPost New Topic
< Prev Topic Next Topic >
lowriderman234 
Member - Posts: 12
Member spacespace
Joined: December 30, 2013
Location: New Hampshire, United States
Posted: December 30, 2013 at 10:34 PM / IP Logged  
Does anyone know what wires are required for the whole system install? I can't seem to get the remote start to work.
lowriderman234 
Member - Posts: 12
Member spacespace
Joined: December 30, 2013
Location: New Hampshire, United States
Posted: December 30, 2013 at 10:35 PM / IP Logged  
It's a 1994 Lexus ES300
chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 31, 2013 at 6:07 AM / IP Logged  
Ready remote.com or bulldog security.com should have the diagrams
Can you list out the connections you've already made.
If i Can't Install it    I Don't need it   Joe
lowriderman234 
Member - Posts: 12
Member spacespace
Joined: December 30, 2013
Location: New Hampshire, United States
Posted: December 31, 2013 at 9:50 AM / IP Logged  
H1/1 red constant 12v to WHITE/ red
H1/2 black ground
H1/3 siren output
H1/4 parking light isolation -not used
H1/5 parking light output -can't locate the wire inside car...
H1/6 not used
Door locks are wired up correctly
H3/1 pink wired to B/Y ignition wire
H3/2 R/W -not used
H3/3 Accessory wired to P/B wire
H3/4 starter output connected to car side B/W
H3/5 starter input connected towards key side B/W
H3/6 connected to 12 volt constant
H3/7 connected to second ignition B/O
H3/8 -not used
H3/9 tapped to 12 volt constant
Haven't start to wire the second harness yet I did attempt to ground the H2/13 BW wire but nothing still...
chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 31, 2013 at 10:49 AM / IP Logged  
PARKING LIGHTS ( + )      GREEN/ BLACK (+)      @ DIMMER SWITCH
Sorry I don't have the guide handy for that system what is the H3/2 , H3/8 ?
What happens when you try and remote start it ?
If i Can't Install it    I Don't need it   Joe
lowriderman234 
Member - Posts: 12
Member spacespace
Joined: December 30, 2013
Location: New Hampshire, United States
Posted: December 31, 2013 at 3:18 PM / IP Logged  
H3/2 = (+) fused 30 a ignition 2 / flex relay input 87
H3/8 = (+) flex relay input 87a key side (if required) of flex relay
The remote says error and the module makes about 8 clicks
chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: December 31, 2013 at 4:13 PM / IP Logged  
I believe 8 is manual trans mode or neutral safety ? Did you program the system for auto trans ? Is the override switch plugged in ? If auto trans Is the BLACK/ white neutral safety wire grounded ? If manual trans is it to the e brake
If i Can't Install it    I Don't need it   Joe
lowriderman234 
Member - Posts: 12
Member spacespace
Joined: December 30, 2013
Location: New Hampshire, United States
Posted: December 31, 2013 at 4:47 PM / IP Logged  
No, the system won't go into program mode, it always goes into valet when i do it. B/W neutral safety wire is grounded and whats the override switch?
chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: January 01, 2014 at 8:23 AM / IP Logged  
Press unlock on the remote before trying to get into programming.
There should be a switch that plugs into the main brain inbetween the main 6 pin connector and the door lock connector.
How are you trying to get into programming ? Key on key off press and hold programming button until the siren chirps the menu number your looking for
If i Can't Install it    I Don't need it   Joe
nyberg 
Member - Posts: 1
Member spacespace
Joined: November 16, 2013
Location: Sweden
Posted: January 01, 2014 at 12:43 PM / IP Logged  
chev104275 wrote:
I believe 8 is manual trans mode or neutral safety ? Did you program the system for auto trans ? Is the override switch plugged in ? If auto trans Is the BLACK/ white neutral safety wire grounded ? If manual trans is it to the e brake
this should be your problem, just got this "fault code" today,
u have a metall switch u plug into alarm, u can choose on/off
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer