astrostart code 2

Home / the12volt's Install Bay / Car Security and Convenience / astrostart code 2

Welcome Guest :)

Members

< Prev Topic Next Topic >

araz2012

Member - Posts: 5

Joined: March 05, 2015

Posted: March 23, 2015 at 8:49 PM / IP Logged

I am getting a code (2blinks when remote start but car does not start nor any dash lights come on) any help would greatful.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 23, 2015 at 10:02 PM / IP Logged

what astrostart unit? code 2 is active brake signal.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 24, 2015 at 2:01 AM / IP Logged

LED brake lights? There's a standing c. 2.5 volts on these and needs to be dioded.

Wrong (hot) side of brake switch?

araz2012

Member - Posts: 5

Joined: March 05, 2015

Posted: March 24, 2015 at 7:39 AM / IP Logged

The unite is an astrostart 2205. It was working great but now it honks every time I unlock and try to remote start it Before it never did that. I pulled the unite down from dash only gives two led blinks.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.