the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Ignition wire relay necessary?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Mike_89gts 
Member - Posts: 42
Member spacespace
Joined: November 05, 2003
Location: Canada
Posted: November 06, 2003 at 5:37 PM / IP Logged  
I'm gonna install a car starter on the g/f's 95 neon.
It (the car) has 2 ignition wires and I read somewhere they
should both be connected to the car starter module using
a relay rather than just connecting one of them.
How the heck would that look?
So, I have 1 ignition wire coming from the car starter module,
2 coming from my ignition switch. - What now?
What goes where on the relay?
Is it really necessary?
Any tips out there?
Thanks in advance,
Mike '89GTS
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: November 06, 2003 at 6:08 PM / IP Logged  
Almost every remote starter out there today has at least 2 ignitons and 1 accessory outputs.
Do you have the remote starter yet? What kind is it?
Mike_89gts 
Member - Posts: 42
Member spacespace
Joined: November 05, 2003
Location: Canada
Posted: November 06, 2003 at 6:51 PM / IP Logged  
It's a ProStart. - It's actually made in Canada.
I don't know if you guys have it down there?
Can I email you the diagrams I got?
I need a little help.
You can send your email address to me at
fly_graphics@hotmail.com if you wish.
Would appreciate your help!
Thanks,
Mike

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer