passlock 1

Home / the12volt's Install Bay / Car Security and Convenience / passlock 1 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 16, 2003 at 8:58 PM / IP Logged

hi installed viper 150 xhf with 555l. the problem im having is it occassionaly trips the theft light causing car not to start. it has only happened 2 times but it is the mother in laws car. anyone have any ideas i've ruled out cold solder because it happened once last year and again tonight. kinda weird but someone once posted "if something goes wrong it''s gotta be families"

good luck

kirk

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: December 16, 2003 at 9:56 PM / IP Logged

Where did you connect the "ground" wire from the 555L? If you connected it to true ground you will get the occasional problem you are experiencing. It needs to go to the passlock ground reference wire next to the passlock data wire.

Back to Top

brocclli13

Member - Posts: 6

Joined: December 06, 2003

Posted: December 17, 2003 at 1:11 AM / IP Logged

I second that thought

Back to Top

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 17, 2003 at 10:24 AM / IP Logged

Also some times the resistance changes slightly with temperature, I had the same problem before. What kind of vehicle?

Gary Kline

MECP Master Technician

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 17, 2003 at 8:42 PM / IP Logged

hi the vehicle is a 1999 cavalier i can't remember where i grounded the module . it think the 555l has passlock ground and module ground not sure though

good luck

kirk

Back to Top

dfiddy

Copper - Posts: 162

Joined: August 17, 2002

Location: Canada

Posted: December 18, 2003 at 12:13 AM / IP Logged

if you use the passlock ground, it should eliminate it locking up, I agree.

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 18, 2003 at 2:12 AM / IP Logged

thanks i'll check it out tonight and advice what i found out used probably 30 of the 555l and this is the only problem probably because it was the mother in laws

good luck

kirk

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

passlock 1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.