the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How many Layers


Post ReplyPost New Topic
< Prev Topic Next Topic >
silverbullet_00 
Member - Posts: 25
Member spacespace
Joined: May 13, 2004
Location: Canada
Posted: May 17, 2004 at 6:56 PM / IP Logged  
Well, thanks to all who contributed thier knowledge in this thread.  I got as far as laying to layers of glass on the pillar.  I have a few huge air pockets though.  After thinking over what I should do, I have decided to stop where I am and just replace the pillar.  My reason for this is because I was not going to do the dash and was undecided on doing the doors as well.  I think I will primer the pieces that I still want to paint and spray them with the metallic paint I have picked out.  Thanks again.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer