the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

New Code Alarm unit


Post ReplyPost New Topic
< Prev Topic Next Topic >
ss586 
Member - Posts: 30
Member spacespace
Joined: March 05, 2004
Location: United States
Posted: June 12, 2004 at 12:52 PM / IP Logged  
I just put a new Code Alarm CA135 alarm/keyless/and start on my truck a few weeks ago. Just today I had it remote started and it just shut down by itself and the alarm started going off. I disarmed it got in and drove off, I noticed while I was driving that the LED was flashing 3 times the pause then 3 times and so on.  Whilke I was driving I could arm and disarm the system. Once I got to work, I tried to remote start it and my parking lights flashed 3 times and made NO attempt to start.  Also, I could not put the unit in valet, weather it was armed or disarmed the LED was flashing in the sequence of 3 flashes the pause.  I unplugged the module for a few min. and then plugged it all back in. Since I did that everything seems to be working fine now. Has anybody had any experience with these new units? If so have you seen one act like this before????? 
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: June 12, 2004 at 1:35 PM / IP Logged  
check the wire that goes to the 12 ign. wire...sounds like its not working
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
ss586 
Member - Posts: 30
Member spacespace
Joined: March 05, 2004
Location: United States
Posted: June 12, 2004 at 1:53 PM / IP Logged  

draasch wrote:
check the wire that goes to the 12 ign. wire...sounds like its not working

Even though it is working fine now that I unplugged it and plugged it back in? I was thinking maybe a bad module??

NowYaKnow 
Gold - Posts: 1,217
Gold spacespace
Joined: December 18, 2002
Posted: June 13, 2004 at 12:46 AM / IP Logged  
Haven't seen that problem, but it definately sounds like a bad connection on the ignition wire. Check your connection. When you unplugged it and plugged it back in it might have been enough to move the connection back to a working spot.
Mike
Manoftools 
Copper - Posts: 55
Copper spacespace
Joined: May 27, 2004
Location: United States
Posted: June 13, 2004 at 3:27 AM / IP Logged  
The CA 135 isnt a remote start.... so how did you remote start....
ss586 
Member - Posts: 30
Member spacespace
Joined: March 05, 2004
Location: United States
Posted: June 14, 2004 at 4:16 PM / IP Logged  

Manoftools wrote:
The CA 135 isnt a remote start.... so how did you remote start....

took the remote start plug out of another package and hooked it up.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer