the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 Dodge Stratus horn honk


Post ReplyPost New Topic
< Prev Topic Next Topic >
JustDoIt2 
Copper - Posts: 98
Copper spacespace
Joined: June 24, 2003
Location: Chile
Posted: June 25, 2004 at 11:13 AM / IP Logged  

HI, I have a Dodge Stratus 2000 and my alarm is a CLifford 3.5 mATRIX,,  the wire from the siren (alarm) is the same as the Horn, but if i connected both the siren and the horn will not sound good, because the alarm use constant and the horn Pulsed, well the thing is that im connecting it to the Illumination wire using 2 relays

relay # 1

86& 87 go to fused 12v constant

85 goes to the orange wire from the 3.5x (ground when armed)

30 goes to relay # 2's 86

(the rest of relay#2)

87 goes to (-) if the horn is negative trigger/goes to (+) if the horn is positive trigger.( make sure you verify this with your dmm. )

30 goes to the horn trigger wire of the vehicle

85 goes to the BLACK/ white from the 3.5x (this is the domelight supervision wire and will provide your pulsed output for the horn to honk.)

ok, this is the thing, on the diagrams my car it says.

Horn WireGREEN/ Black (-) Steering Column White 3 Pin Connector 

I foound the Whit connector that has three wires which if I umplug the connector the horn does not sound, but  there are three wires, (none of then are GREEN/ black) there is one  which is a bron (which is - and does not change polarity when the horn is sounding, there is the second wire which is a RED / green this is wire is - and does not change polarity) and the third wire is a BLACK/ RED which is + and does change the polarity IS goes down everytime i press the honk,.

I dont know which one to connect and if it negative or positive and what relay to use.

thank you

.

jfk51502003 
Copper - Posts: 221
Copper spacespace
Joined: March 04, 2004
Location: United States
Posted: June 25, 2004 at 1:30 PM / IP Logged  
horn trigger BLACK/ red   -  steering column
this is it...
dei user 
Member - Posts: 44
Member spacespace
Joined: June 22, 2004
Location: United States
Posted: June 26, 2004 at 1:31 AM / IP Logged  
 dei sells a product that has a relay and a flasher all prewired and it tells u exactly how to wire it up  and that is how u solve that problem
dei user

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer