trying to make an illuminated switchpanel

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / trying to make an illuminated switchpanel (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

crudeau

Copper - Posts: 150

Joined: August 25, 2003

Location: United States

Posted: March 18, 2005 at 11:37 AM / IP Logged

I found some blue rocker switches from Painless that I want to get. I am going to be making a switch panel for my 05 F150 that will fit in one of the Din slot's with my head unit. Not that I found the switches, I am trying to figure out how to label the panel with what switch is what. I would like for these labels to be illuminated. Anyone have any clue as to where to even start to figure this out?

crudeau

Copper - Posts: 150

Joined: August 25, 2003

Location: United States

Posted: March 18, 2005 at 12:19 PM / IP Logged

found my own answer. sweet

http://www.melrose-nl.com/overlay.html

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

trying to make an illuminated switchpanel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.