12v dimmer

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / 12v dimmer (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bottleinamessag

Member - Posts: 2

Joined: January 08, 2006

Location: United States

Posted: January 08, 2006 at 8:06 AM / IP Logged

The salon in my boat currently uses 4, 12v flouresent lights. They do not put out suffient light and the bulbs constantly fail. I'm going to change them and I'm looking for ideas. At the moment, I'm considering a fixture that uses a 20W, MR16 bulb. It would require 8 of them to do the job. I would like to add a dimmer switch as well. Ideas and suggestions welcomed. Also need a source and part number for a dimmer. It needs to be quite small ideally. Thanks.

Search for other posts by bottleinamessag

total_overkill

Copper - Posts: 93

Joined: November 24, 2005

Location: Canada

Posted: January 17, 2006 at 3:48 PM / IP Logged

Have you looked into LED technology? You can get some really nice 10 MM super bright and run em in arrays. They would demand verry little in the way of power and can be dimmed as well. You can get em super bright or low and in a variety of dispersment angles. Narrow beam or wide angle.

40 grit has saved my life sometimes =[

Search for other posts by total_overkill

bottleinamessag

Member - Posts: 2

Joined: January 08, 2006

Location: United States

Posted: January 18, 2006 at 7:05 AM / IP Logged

Thanks, sounds like a good idea. Do you know of a source where I can look at them? Thanks

audiocableguy

Copper - Posts: 630

Joined: January 27, 2003

Location: Idaho, United States

Posted: January 18, 2006 at 8:42 AM / IP Logged

Take a look at blueseasystems.com They offer a very cool digital 12v dimmer that is sold at westmarine.com.

total_overkill

Copper - Posts: 93

Joined: November 24, 2005

Location: Canada

Posted: January 18, 2006 at 9:01 PM / IP Logged

A good Idea might be to do a search in this forum under LEDs and read as much as you can about them. You willunderstand quite quickly the benefits and cons to them. Either way they are really cool if you ask me, and if you gain more knowledge can't hurt either. The main thin is making sure you run em at the right current or add a resistor to them to equal the current draw. Again you'll understand alot more with this search.

I did one for ya but ya get the idea.

https://www.the12volt.com/installbay/search.asp?KW=LED&SM=1&SI=TC&FM=18&OB=1

40 grit has saved my life sometimes =[

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

12v dimmer

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.