remote start, 1990 ford festiva
Home /
the12volt's Install Bay /
Car Security and Convenience / remote start, 1990 ford festiva (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: January 21, 2008 at 11:57 AM / IP Logged
looking at the starting system.. couldnt i cut the starter wire after the clutch switch, and put the green wire on the clutch switch side and the purple wire on the starter side? the starter wire will be past the switch. the clutch switch should still work under regular starting, and anti grind should still work too, i think?
Posted: January 21, 2008 at 12:00 PM / IP Logged
oops, wron picture, can we not edit here?
Posted: January 21, 2008 at 12:06 PM / IP Logged
12 VOLT CONSTANT WHITE (+) IGNITION SWITCH HARNESS
STARTER BLACK/ BLUE (+) IGNITION SWITCH HARNESS
IGNITION 1 BLACK/ WHITE (+) IGNITION SWITCH HARNESS
ACCESSORY /HEATER BLOWER 1 BLUE/RED (+) IGNITION SWITCH HARNESS
if you look at the daigram, if i dont energise the BLACK/ red ON position wire my heater wont run with remote start...
I guess i should use the pink/white wire for this?
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
