98 bmw 323is clutch sensor

Home / the12volt's Install Bay / Car Security and Convenience / 98 bmw 323is clutch sensor (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

bmr_276

Member - Posts: 10

Joined: March 11, 2008

Posted: March 13, 2008 at 5:13 PM / IP Logged

[KarTuneMan]:

This is from our friend Howie.... (poor guys internet SUCKS.)

If E36, go to hazard flasher switch and GROUND thin BROWN / blue....

do i ground it to the chassis?

or is there supposed to be a wire from my alarm to ground it?

and which wire would i connect my +12V output from my alarm?

sorry, kinda new at all this...

thanks

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 13, 2008 at 7:58 PM / IP Logged

Howie cant get onto 12v right now since his ISP is timing out again. He told me to mention: on the unit, change the polarity of the ouput from 12v(+) to negative.

bmr_276

Member - Posts: 10

Joined: March 11, 2008

Posted: March 13, 2008 at 10:25 PM / IP Logged

ohhhh i see

thanks

i'll try that

bmr_276

Member - Posts: 10

Joined: March 11, 2008

Posted: March 13, 2008 at 11:20 PM / IP Logged

i just found out that my alarm has a negative (-) start,

not a +12V start...

so how would i go about connecting my clutch sensor?

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 14, 2008 at 8:04 AM / IP Logged

cant be. all units have 12v start outputs and ADDITIONAL 250mA (-) start outputs to connect/drive relays.

if i remember the start wire from the scytek unit will be VIOLET. connect the violet to BROWN / black wire at clutch

bmr_276

Member - Posts: 10

Joined: March 11, 2008

Posted: March 14, 2008 at 12:54 PM / IP Logged

i still cant find it...

the violet one is for door trigger input (+)...

i found an online version of my owner's manual

for my alarm...

www.scytek.net/pdf/product_galaxy_combo_5100RS_manual.pdf

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 14, 2008 at 6:06 PM / IP Logged

i was talking about the VIOLET wire from the 6 pin harness which are THICK gauge wires. connect that violet to the BROWN / BLACK @ clutch switch

bmr_276

Member - Posts: 10

Joined: March 11, 2008

Posted: March 14, 2008 at 8:02 PM / IP Logged

ok i'll try that

thanks

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: March 15, 2008 at 2:01 PM / IP Logged

rtfm

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 bmw 323is clutch sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.