glue spray gun

What type of spray gun are you using to spray glue?Is there a specific type of gun for glue out there? I bought a cheap primer gun to spray contact cement and it is just too thick, even though i thinned the contact cement down quiet a bit. Maybe I am using the wrong type of glue? Any suggestions?

go down to your local auto upholstery and buy some glue the gun your using is fine if you ceck out the equipment they use you'll get a better picture of what type of equipment to use good luck

what you can do is get a bigger tip for spraying your glue.....you can get a tip that is 1.7mm or 2.0mm this will spray the glue better......or make sure you are mixing the thinner in the glue well i mix my glue and thinner to about a 75% glue to 25% thinner and mix it well. i am just using spray grade contact cement through a cheap gravity feed spray gun.