Starter turns but car doesn't start

Home / the12volt's Install Bay / Car Security and Convenience / Starter turns but car doesn't start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nadeemr

Member - Posts: 32

Joined: March 09, 2003

Location: United States

Posted: March 16, 2003 at 8:08 PM / IP Logged

I installed an Audiovox remote starter in my 93 Toyota Camry XLE (6 Cyl). I programmed the tech and the unit confirmed that it learned the tech. The problem is that when I try to start using remote starter, the starter tries to start the car but it does not start. Does anyone knows if I there is any factory module that I need to bypass? Everything else like door lock/unlock, interior light supervision and parking lights work fine.

Back to Top

Scott35

Silver - Posts: 258

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 02, 2002

Location: United States

Posted: March 16, 2003 at 8:16 PM / IP Logged

Could you maybe have ignition 1 and 2 switched?

Tacomacrew

Back to Top

Scott35

Silver - Posts: 258

Joined: August 02, 2002

Location: United States

Posted: March 16, 2003 at 8:21 PM / IP Logged

Ignition 1 is BLACK/ orange, ignition 2 is BLACK / YELLOW.

Tacomacrew

Back to Top

nadeemr

Member - Posts: 32

Joined: March 09, 2003

Location: United States

Posted: March 17, 2003 at 4:30 PM / IP Logged

I found the problem last night after I post the initial message. The remote starter's factory default setting was 'IGNITION 2 OFF DURING CRANK' . When I changed it to ignition 2 on during crank, it worked. By the way does it matter if I accidently switched the ignition 1 and 2 wires? since both wires were of the same guage and my assumption is that in my car both turn on at the same time. Also if anyone knows about what Ignition 2 wire does in 93 camry? Does Ignition two relay have to come on to start the car? I am asking these questions because I still think that I may have switched the two wires.

Back to Top

Scott35

Silver - Posts: 258

Joined: August 02, 2002

Location: United States

Posted: March 17, 2003 at 4:45 PM / IP Logged

On my Tacoma, it would not crank when the wires were switched.

Tacomacrew

Back to Top

tom cat

Member - Posts: 30

Joined: February 02, 2003

Posted: March 17, 2003 at 4:46 PM / IP Logged

it will not matter as long if you have power on them when is starting

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Starter turns but car doesn't start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.