viper 5301 remote start

H1 Red - 12 Volts Brown - Horn Black - Ground Green - Can be hooked up to dome light (easier) White - Parking Light (Place fuse in brain for + park lights)       H2 Lt. GREEN/ Black - Factory Disarm       H3 Violet - Starter Pink - Ignition Pink/White - Ignition 2 Orange - Accessory Remote Start Input 5-pin BLACK/ white - **Ground** or run to e-brake for m/t Violet/White - Tach Brown - Brake Gray - Hook up to hood pin that came with alarm/starter and mount Door Lock 3-pin Blue - Unlock Green - Lock That should be all the connections you need to make.

you DO NOT need to hook up the pink/black... that was erroneous info..... the info above is all you need....Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

my RS came with a DEI-451 module, do i need this?

nopeKevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

i have everything hooked up i can lock and unlock my doors.. when i try to start it the keyfob beeps an error and when i diagnose it flashes 7 times - manual transmission mode is enabled and not initialized?? i checked all my 12v sources and they are all showing power?

What does 7 flashes say in the manual...Sounds like you need to learn tach...Or put it in automatic mode...!M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Did you make a connection to the BLACK/ white in the 5 pin harness...Did you put it on a toggle switch...Is the switch on...? Check the hood pin...M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

yes the BLACK/ white (neutral safety switch) is grounded.. the toggle switch is in ON mode.. i didn't hook up the hood pin.. i figured the hood pin would only activate when the circuit was complete, meaning the wire is grounded so i didn't bother with the hood pin..

i have no idea how to put it in 'automatic' mode? it doesn't say in the manual.. i tried tach learn and according to the manual it took it

nobody knows?