2003 avalanche factory remote programming

Home / the12volt's Install Bay / Car Security and Convenience / 2003 avalanche factory remote programming (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mr-remote

Member - Posts: 3

Joined: June 10, 2009

Location: Jamaica

Posted: November 21, 2009 at 1:02 PM / IP Logged

Does anyone out there know how to programme a replacement remote for a 2003 Chevy Avalanche.

Mr-Remote

Back to Top

OmarR

Copper - Posts: 162

Joined: April 02, 2003

Location: Indiana, United States

Posted: November 21, 2009 at 11:27 PM / IP Logged

1) Close all doors and insert key in ignition

2)Hold down UNLOCK button on door panel

3)Turn ignition ON, OFF,ON,OFF. Release UNLOCK button on door panel. Door

locks should LOCK then UNLOCK indicating the vehicle has entered programming

4) Hold down LOCK and UNLOCK on the remote for 15 seconds. The doors should

LOCK then UNLOCK

5) Repeat step (4) for each additional transmitter (up to 4 total)

6) Turn ignition ON and OFF to exit programming. Verify function of remotes.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 avalanche factory remote programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.