viper 5901 antenna placement

Home / the12volt's Install Bay / Car Security and Convenience / viper 5901 antenna placement (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

james909

Member - Posts: 21

Joined: January 05, 2010

Location: New York, United States

Posted: January 20, 2010 at 9:08 AM / IP Logged

Thanks for the reply. I'll try grounding the neutral safety switch wire. Other than that you didn't see any problems though, right? I am planning on hooking up the tach wire I just wanted to test it out first. And every single piece of the old alarm has been removed and the wires were taped up.

Back to Top

james909

Member - Posts: 21

Joined: January 05, 2010

Location: New York, United States

Posted: January 21, 2010 at 7:48 PM / IP Logged

Update: The alarm module was defective. I got another one, plugged it in and it works. Apparently this doesn't happen very often as an installer I spoke with doubted that anything was wrong with the module. I guess I was just very unlucky.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 5901 antenna placement

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.