python 460hp, two alarms on one wire

Home / the12volt's Install Bay / Car Security and Convenience / python 460hp, two alarms on one wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sparky23

Member - Posts: 8

Joined: January 10, 2010

Location: Oregon, United States

Posted: January 23, 2010 at 11:30 AM / IP Logged

I have the DEI Python 460HP and am wondering if it is ok to hook two sirens up to the same H1/10, BROWN, wire siren output?

Also wondering since this alarm has only one sensor port how can I add more sensors later on if I want to?

Thanks

chev104275

Gold - Posts: 1,433

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: January 23, 2010 at 1:16 PM / IP Logged

for the sirens i would use a relay

you can tie the blues and greens together on the sensors use diodes just remember the more sensors the more chances of alarm triggers and a hard time finding out what sensor is causing the trigger

If i Can't Install it I Don't need it Joe

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 460hp, two alarms on one wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.