ignition zone trigger

I just finished installing a viper 5701 alarm/remote start in my 09 charger. Everything works fine, the alarm, the remote start, the bypass, etc. But when I make any kind of command (arm, disarm, remote start) I get the error sound from the keyfob and 5 clicks/flashes. The manual says it's a ignition trigger. What exactly does that mean? I have an xpresskit CHALL bypass module, running d2d connection, the only wires I have connected from the bypass to the brain is the ignition, and door status. Any help would be greatly appreciated.

did you ground the black with white wire the neutral wie ??installers do it best. we got the magic hands!