2002 dodge ram install

Home / the12volt's Install Bay / Car Security and Convenience / 2002 dodge ram install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Cbr629

Copper - Posts: 79

Joined: March 18, 2002

Location: Maryland, United States

Posted: April 12, 2003 at 11:18 AM / IP Logged

I put an alarm with remote starter in this vehicle,everything works fine but when the guy puts his ignition switch in the 'acc' position all of the lights on the dash come on as if he were ready to start the truck.I put diodes on the ignition wires from the remote starter and it still does the same thing...please help.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 12, 2003 at 12:02 PM / IP Logged

You didn't hook up one of the alarms ing or acc outputs to both the acc and the ign? Also you should check the connections, if you soldered and taped, to make sure that there are no bare wires that could be touching somewhere. Also what type of alarm did you install?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 12, 2003 at 12:17 PM / IP Logged

When you installed the RS did you relay isolate the 2nd IGN & the 2nd ACC wires ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Cbr629

Copper - Posts: 79

Joined: March 18, 2002

Location: Maryland, United States

Posted: April 12, 2003 at 8:59 PM / IP Logged

I used a excalibur alarm with remote starter,I had two ign wires from the remote starter and I had to add three relays.I added diodes from each wire off of the relays to power the other ign and acc wires

thanks

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 13, 2003 at 8:01 AM / IP Logged

Does the lights do that if you were to disconnect the Excalibur system from the harness ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Homicyde

Member - Posts: 20

Joined: March 24, 2003

Location: United States

Posted: April 13, 2003 at 10:16 AM / IP Logged

when you put the relays on the green and orange wires, you have to use a ground off the alarm thats only active when the remote start is running the engine, i had the same problem.....

Homicyde-

Back to Top

Brian Gaarder

Member - Posts: 1

Joined: April 07, 2003

Location: United States

Posted: April 13, 2003 at 3:04 PM / IP Logged

I dont know if this ios going to help but........ In 96 to 2001 dakotas the BLACK/ white wire in the ignition harness in NOT a second accessory wire ... its a second ignition wire..... if you connect a accessory wire to it it will cause the gauges to malfunction ........

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 dodge ram install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.