2003 dakota remote start troubleshooting

Home / the12volt's Install Bay / Car Security and Convenience / 2003 dakota remote start troubleshooting (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

schroedc

Member - Posts: 1

Joined: December 02, 2010

Posted: December 02, 2010 at 7:52 PM / IP Logged

I have installed an audiovox remote start unit in my 2003 dakota with the 4.7, I have a decent tach signal coming out but the device will not successfully learn the tach signal so I can move on to actually using the remote start to finish testing the install. Has anyone else run into this and have any suggestions?

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: December 02, 2010 at 9:13 PM / IP Logged

where did you connect your tach wire? you should connected to the wire of one of the ignition coils that is not GREEN/ orange. have you measured the voltage from the tach wire? you should have about 5-8 volts AC when running and 0 VAC when the truck is off. if your having trouble with tach signal programming you can try programming it for voltage sense.

phil6710

Copper - Posts: 89

Joined: September 04, 2009

Location: New York, United States

Posted: December 02, 2010 at 9:47 PM / IP Logged

can you program the starter for a tachless install?

Solartech Window Tinting and Electronics,contract installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 dakota remote start troubleshooting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.