dei 529t resistance change

Home / the12volt's Install Bay / Car Security and Convenience / dei 529t resistance change (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

chrizzerz

Member - Posts: 4

Joined: January 16, 2008

Posted: February 11, 2011 at 10:30 PM / IP Logged

Hi everyone, I have a 529t installed on my truck and ccasionally the windows don't roll up all the way. I know the 530t has dipswitches to change the resistance it stops at, buy my 529t doesn't. I've heard that you can open the unit up, and solder in a resistor of your own to change the setting though. Is this possible, and if so how is it done?

Back to Top

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 12, 2011 at 2:41 AM / IP Logged

Probably a lot easier to check that the window mech moves freely and occasionally spay the channels with WD 40.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei 529t resistance change

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.