1999 acura integra with viper 5902

what about the H2/18 (-) Neutral Safety Input what do i hook that up to? my car is a 5 speed not a automatic

what do i hook up on the H2 18 pin harness?

Please do not attempt this yourself, from your questions I can tell you that you are going to cause your self lots of expensive grief. Do you have a DMM?

whats a DMM?

I rest my case.

just looked up dmm was and yes i do have a DIGITAL MULTI METER!!! never herd it called that before thats why i dint know what it was. i have a fluke 179

OK then back to your first post; you're questioning the site here, take your DMM and test!!! Once we know what you have we might be able to help. No one here will hold your hand through this install, it isn't worth our time and repeatedly telling you "I told you do do this" etc. This really is a pro install although the car is dead easy. We haven't even got to basics such as is there a factory alarm and or immobiliser; the only person who can tell us is you!

Read my post from Feb 15.  Howie II is correct on how easy this car should be. Get the meter out and test.When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Smokeman, I think this could be the new record post unless the moderators come in on this one. I see t&t quite rightly lost it with the poster.

all im asking is do i have to hook up anythign on the h2 harness and if so what to?

Does the car have a neutral safety switch? The wires required on that harness are

Gray- hood switch

Brown- Brake

BLACK/ white-Nss

commit your way to jehovah and he will act in your behalf. psalms 37:5