2010 corolla 80 bit key

Home / the12volt's Install Bay / Car Security and Convenience / 2010 corolla 80 bit key (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: March 10, 2011 at 10:18 AM / IP Logged

Not worth it. There isn't a wire in this car that isn't easy to get to. The only advantage of a Can module from Idata is the factory remotes still work when the remote start is on. If you want this option then that's the way to go...

Mike M2

Tech Manager

CS Dealer Services

latinyoungn

Member - Posts: 10

Joined: March 08, 2011

Location: New York, United States

Posted: March 10, 2011 at 11:16 AM / IP Logged

thanks mike.

do you know if the pkall requires imi/imo connections? i dont see it in the manual.

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: March 10, 2011 at 11:26 AM / IP Logged

The PKALL is all done right at the steering column. Its cake to put in

latinyoungn

Member - Posts: 10

Joined: March 08, 2011

Location: New York, United States

Posted: March 10, 2011 at 11:29 AM / IP Logged

sounds good to me. my last question is does the pkall need to be flashed or is it good to go out of the box

Satkunas

Copper - Posts: 97

Joined: April 04, 2005

Location: Canada

Posted: March 10, 2011 at 11:40 AM / IP Logged

It's Preloaded.

Good to go right out-of-the-box.

latinyoungn

Member - Posts: 10

Joined: March 08, 2011

Location: New York, United States

Posted: March 10, 2011 at 11:43 AM / IP Logged

thanks guys. I am going to pull the trigger on the 5901 + PKALL. if it doesnt work ill be sure to have more questions 2010 corolla 80 bit key - Page 2 -- posted image.

2010 corolla 80 bit key - Page 2 -- posted image.

! lol

-dave

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: March 10, 2011 at 5:59 PM / IP Logged

Remember, there are 2 wiring diagrams for this car depending on where it was made. The Canadian model and the Japan model look identical but the color codes are different...

Mike M2

Tech Manager

CS Dealer Services

latinyoungn

Member - Posts: 10

Joined: March 08, 2011

Location: New York, United States

Posted: March 22, 2011 at 2:02 PM / IP Logged

I am unable to find the trunk release wire. tried light green as well as pink and cannot find it. does anyone have an idea where it could be?

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: March 22, 2011 at 4:32 PM / IP Logged

Trunk Release Motor

pink (USA/CAN made) or red (Japan made)

5 wire

driver kick, white 13 pin plug, pin 2

Mike M2

Tech Manager

CS Dealer Services

blanx218

Silver - Posts: 654

Joined: September 23, 2008

Location: Pennsylvania, United States

Posted: March 22, 2011 at 4:34 PM / IP Logged

Does the car have factory keyless entry? If it doesn't you won't find it. If it does it would be in the DKP in the harness to the rear of the vehicle. Did one of these the other day that didnt have keyless and the wire didnt exist.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.