the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Unlocking door problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
Jaspurr 
Member - Posts: 4
Member spacespace
Joined: March 30, 2003
Location: Canada
Posted: April 29, 2003 at 5:30 PM / IP Logged  

I have installed a prostart ct-3100 autostart in a 1996 Pontiac Grand Prix. It works good except when the engine turns off, either by touching the brake or by time out, the doors unlock. Can I do something to prevent this.

Thanks

Jas
scuba1954 
Member - Posts: 20
Member spacespace
Joined: February 28, 2003
Location: United States
Posted: April 29, 2003 at 5:59 PM / IP Logged  
Sounds to me that you alarm may be programmed to unlock the doors when the engine stops. On my alarm/start system I can program them to lock at start, maybe yours unlocks automatically. Just a suggestion.
elrayodesinaloa 
Copper - Posts: 120
Copper spacespace
Joined: April 28, 2003
Location: United States
Posted: April 29, 2003 at 6:23 PM / IP Logged  
program the alarm to lock after remote start turn off, instead of unlock after remote start turn off. Most of the alarms offer two steps. lock before start, and unlock after remote start, make sure you program it both before and after starting to "lock". Take it easy
Jaspurr 
Member - Posts: 4
Member spacespace
Joined: March 30, 2003
Location: Canada
Posted: April 29, 2003 at 7:06 PM / IP Logged  

Thanks for the suggestions. The car doesn't have an alarm, but the doors unlock automatically when the key is turned off. Maybe I can somehow bypass this.

Thank again

Jas
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: April 29, 2003 at 9:48 PM / IP Logged  
yes, it is a feature that gm put on the car...i dont know you can bypass that feature..
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Jaspurr 
Member - Posts: 4
Member spacespace
Joined: March 30, 2003
Location: Canada
Posted: April 30, 2003 at 9:42 AM / IP Logged  

If anyone else has this problem I figured out a fix, sort of. I connected the re-arm wire from the module to the lock relay. I used two diodes to prevent a pulse going to the module also. After time out or remote shutdown it gives a 1 sec pulse 4 seconds after shutdown.

Thanks for replying back.

Jas
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 01, 2003 at 8:39 AM / IP Logged  
You have ignition controlled door locks. Try the dealer and ask if they can remove this option from the keyless entry module and make sure that the feature is turned off on the ProStart.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Jaspurr 
Member - Posts: 4
Member spacespace
Joined: March 30, 2003
Location: Canada
Posted: May 01, 2003 at 9:17 AM / IP Logged  

Thank You Jeff

And I would not have been able to get the unit working if not for your site.

Jas
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 01, 2003 at 11:01 PM / IP Logged  
No problemo.... any time Unlocking door problem -- posted image.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer