bmw x1, viper 5904

Home / the12volt's Install Bay / Car Security and Convenience / bmw x1, viper 5904 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 14, 2012 at 3:55 PM / IP Logged

im just not a fan of d2d. i have yet to see a reliable solution from directed in general. if we are talking about idatalink or fortin with compustar then there is no issue. but i just spend the extra 5min and w2w everything.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

killercornflake

Member - Posts: 9

Joined: March 08, 2012

Location: United Kingdom

Posted: March 15, 2012 at 2:04 AM / IP Logged

TED

Thats made my mind up then. i,ll w2w the viper 5904 to the Fortin EVOall and the int-bmw2 .

Ill just have to get them shipped over as well now.

Thanks again for your advice , much appreciated

Dave

killercornflake

Member - Posts: 9

Joined: March 08, 2012

Location: United Kingdom

Posted: July 16, 2012 at 7:09 AM / IP Logged

Im back ! I have installed the system and yes you guess it i have a little problem. LOL bmw x1, viper 5904 - Page 2 -- posted image.

Alarm works great . I used the d2d setup with the evo all from fortin and the Viper 5904 . The evo all can now pe programmed to use D2D as apposed to fortin data protocol. Everything works on the alarm side , ie the viper sees when the door , trunk , ignition etc, trigger the alarm.

As i have a manual transmission with the KIBMW2 bypass installed i have set the Viper to Manual mode and learned the Tach signal. I have connected a wire to the injector direct to be sure.

The Viper will not go in to MTS mode when i select remote start with the keyfob!

If i go back to automatic transmission mode i can remote start the vehicle , but only if i manually press the clutch pedal?

Any ideas would be appreciated guys . Thanks Dave

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: July 16, 2012 at 7:30 AM / IP Logged

Change it to W2W.

killercornflake

Member - Posts: 9

Joined: March 08, 2012

Location: United Kingdom

Posted: July 16, 2012 at 9:37 AM / IP Logged

Theres an idea . lol should of done that in the first place!!!!!!

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bmw x1, viper 5904

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.