ads aldl n15 en not programming
Home /
the12volt's Install Bay /
Car Security and Convenience / ads aldl n15 en not programming (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: December 14, 2012 at 1:01 AM / IP Logged
I decided to check all wires with a DMM during remote start.Sure enough something doesn't work. All wires show activity/voltage spike during a remote start except for Brake Status (2V DC steady) and ignition output 0v).
What could be wrong?
Any input (only text no voltage)
is greatly appreciated."Good judgment comes from experience. Experience comes from poor judgment."
-unknown
is greatly appreciated."Good judgment comes from experience. Experience comes from poor judgment."
-unknown
Posted: December 14, 2012 at 3:41 PM / IP Logged
https://www.the12volt.com/installbay/forum_posts.asp?tid=132679
the12volt • Support the12volt.com
the12volt • Support the12volt.comSorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
