clifford 330.3x in 03 dodge ram hemi 2500

Home / the12volt's Install Bay / Car Security and Convenience / clifford 330.3x in 03 dodge ram hemi 2500 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

beech2000

Member - Posts: 33

Joined: January 18, 2013

Location: Georgia, United States

Posted: January 19, 2013 at 12:17 PM / IP Logged

kreg357 wrote:

Here is a link to a Pictorial on that 2006 Ram : https://www.the12volt.com/installbay/forum_posts.asp?tid=130085&tpn=1&PN=1

The caption for the next to last picture gives the details on the Parking Light resistor.

5k Pot thats a great idea to find resistance. Wish known value would work but oh well. Is the 1N4007 across 85 and 86 to clip coil spikes?

beech2000

Member - Posts: 33

Joined: January 18, 2013

Location: Georgia, United States

Posted: January 19, 2013 at 12:35 PM / IP Logged

kreg357 wrote:

Are you sure you looked up the right vehicle? Here is the one-wire lock info :

http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp Your Clifford

system has on-board relays, so follow the Type H diagram ( similar to Directed

451M module Type H wiring ).

Yes, the H3/5 Yellow wire would go to the IGNITION 1 BLUE (+) 16 Gauge wire @ IGNITION SWITCH HARNESS

For vehicle wiring, here are some sources :

Here is a link to Ready Remote : http://www.readyremote.com/main.asp

Here is a link to AudioVox : http://techservices.audiovox.com/AccessRequest.aspx Sign-up & info is free.

Yes the correct vehicle was selected 2003 Dodge Ram 2500 4dr. and Bulldogs diagram shows isolation diodes for all 4 doors. This diagram applies to my vehicle right?

clifford 330.3x in 03 dodge ram hemi 2500 - Page 2 -- posted image.

kreg357

Platinum - Posts: 7,790

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 30, 2009

Location: Pennsylvania, United States

Posted: January 19, 2013 at 2:36 PM / IP Logged

Yes on the relay coil quenching diode. Don't want the flashing parking light relay to generate a jolt back to the R/S brain and kill it.

Yes. While it is a generic diagram, it is applicable to your truck. Just locate the correct wires and connect to all four trigger wires giving the R/S a single door trigger input.

The diodes prevent ( isolate ) one door's open signal from feeding back to the other doors and making the truck think all four doors are open.

Soldering is fun!

beech2000

Member - Posts: 33

Joined: January 18, 2013

Location: Georgia, United States

Posted: January 20, 2013 at 9:37 PM / IP Logged

Have everything hooked up now. Think its working perfectly. I'll let you know. How much do I owe you?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford 330.3x in 03 dodge ram hemi 2500

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.