2013 dodge dart 1.4l turbo

I really want to install a remote start in my 2013 Dodge Dart 1.4L Turbo w/manual trans.. though I cannot find anything on the wiring for the car.. Any suggestions for transponder bypass would be as well.. Thanks in advance.

Right now, there doesn't appear to be any bypass modules available from the main three manufacturers

( Fortin, iDatalink and XPressKit ).  If you car has a standard key, a "Key In The Box" might be the only option.

The only source listing the wiring for the Dart is Ready Remote, but it is incomplete.  It lists the PURPLE / Brown

Ignition MUX wire but nothing about resistor values.  Here is a link :  http://www.readyremote.com/main.asp?make=Dodge&model=Dart  There is nothing on the Clutch Interlock wire, so a DMM will come in handy there.

Most bypass modules for the newer Chrysler vehicles are very good and are full of features.  It might be

worth the wait for Fortin or iDatalink to release a bypass module solution for that car.

Soldering is fun!