python 5706 door locks

smokeman1 wrote: Have you connected the relays as discribed above?

yes numerous times with no results

All right, let's try this. Take the blue and green leads from the actuators and attach one of the leads to a ground. Take the other lead and BREIFLY apply 12 volts to it. Does the actuator move? Lock or unlock? Yes? No? Now switch the leads and see if the actuator moves in the other direction. Remember BREIFLY apply the 12 volts. You are only trying to see if the actuators are working/moving. If they work then connect your relays: 87 and 86 of both relays to 12 volts 87A of both relays to ground the 30 pin of one relay to the green actuator lead and the 30 pin of the other relay to the blue actuator lead. This should leave the 85 pin of both relays unconnected. Take ONE of the 85 pin wire and touch/release it to ground. Does the actuator lock or unlock? Now do the same thing,(touch/release),with the OTHER 85 pin wire. Does the actuator lock or unlock? When all else fails, Read the Instructions

Support the12volt.com Make a Donation