2015 subaru forrester/Evo-all

Home / the12volt's Install Bay / Car Security and Convenience / 2015 subaru forrester/Evo-all

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: September 28, 2015 at 11:53 AM / IP Logged

i can't get the fortin evo-all to program for this 2015 forrester standard key automatic trans.i double checked my connections and everything is connected per the fortin diagram-when i get to the part of pressing the program button 6 times the led's only flash once per second not 5 times per second.i re-flashed the module and even tried a second evo-all module with no luck.

Back to Top

tianot

Copper - Posts: 155

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 25, 2009

Location: Alberta, Canada

Posted: September 30, 2015 at 4:33 PM / IP Logged

did you load the latest firmware version of the evo all? as per the diagram say, you must have hardware minimum version of 6 and minimum fermware version of 79.29.

tianot

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: September 30, 2015 at 5:55 PM / IP Logged

just did that-will be getting the car back this weekend to try again,,thanks !

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: September 30, 2015 at 6:38 PM / IP Logged

http://fortin.ca/en/vehicles/subaru/forester/2015/troubleshooting.html

You may want to check this out when you get the vehicle back.

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: September 30, 2015 at 8:33 PM / IP Logged

Thanks rs specialist,i will do that-I thought i had 2 bad evo-all modules(what's the odds)hopefully the firmware update is the answer!

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: October 03, 2015 at 8:17 AM / IP Logged

i cant figure out how to update the hadware version on the evo-all..i can update the firmware but not the hardware.

Back to Top

rs specialist

Copper - Posts: 175

Joined: September 30, 2015

Location: Arizona, United States

Posted: October 07, 2015 at 7:05 PM / IP Logged

You can not update the hardware. That is what the evo-all is. if you need updated hardware you need a new module.

Back to Top

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: October 10, 2015 at 9:49 PM / IP Logged

got the new evo-all hardware version 6 today-install went perfect...thanks for the help.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.