Viper 4806v on toyota camry with key override

Home / the12volt's Install Bay / Car Security and Convenience / Viper 4806v on toyota camry with key override

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

gpslitt

Member - Posts: 8

Joined: November 05, 2015

Location: Ontario, Canada

Posted: December 03, 2015 at 11:12 AM / IP Logged

it didnt start,

parking light flashes 7 times, as per guide, its is manual mode,

need programming to get to automatic,

but didnt going to programming mode as given on guide,

any suggesstions

pls advice

regds...Litt

Regds..Litt

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: December 03, 2015 at 11:28 AM / IP Logged

Make sure green door trigger on H2 aux plug goes to ground when a door is open.

Make sure pink on heavy duty harness goes to 12V+ on ignition.

Test from the plug to your grounding point.

Make sure the antenna is correctly plugged in at both ends.

Carefully read the programming instructions.

Open driver door, ign on then off, hold button on control centre, 1, then 2 then three chirps release, press button once, press remote lock button, should hear 2 chirps.

That's off the top of my head so double check.

gpslitt

Member - Posts: 8

Joined: November 05, 2015

Location: Ontario, Canada

Posted: December 03, 2015 at 7:23 PM / IP Logged

thnx howie it worked, will be posting all findings tomorrow

thnx again

Regds..Litt

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.