Viper 4204V 2-way, no confirmation response

Home / the12volt's Install Bay / Car Security and Convenience / Viper 4204V 2-way, no confirmation response

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

26oz

Member - Posts: 6

Joined: December 07, 2015

Location: Alberta, Canada

Posted: January 08, 2016 at 10:18 PM / IP Logged

Hi,

I have just installed a Viper 4204V remote starter with Idatalink ABS-ALCA bypass on a 2007 Toyota Matrix XR (Canadian model) automatic.

I have everything installed and working but I do not get a response back from the Viper unit to confirm the car has started.

I do get confirmation back for 'lock', 'un-lock' and to end the start session so I am mystified as to the non-response on start.

Any suggestions? Thank you.

I'm workin' on it.

Back to Top

blackdenali04

Member - Posts: 3

Joined: December 09, 2015

Posted: January 28, 2016 at 12:02 PM / IP Logged

Could try pulling the battery out of the remote for 10 minutes then putting it back in. That worked for me when my viper 5706v remote started doing that. Hope that works for you.

Back to Top

26oz

Member - Posts: 6

Joined: December 07, 2015

Location: Alberta, Canada

Posted: January 28, 2016 at 10:00 PM / IP Logged

Thanks for the tip; that didn't occur to me.

Cheers.

I'm workin' on it.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.