2000 s10, starter issue

Home / the12volt's Install Bay / General Discussion / 2000 s10, starter issue

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sshrader

Member - Posts: 1

Joined: February 13, 2016

Location: Arkansas, United States

Posted: February 13, 2016 at 6:38 PM / IP Logged

Hello everyone, I have came here wondering if anyone can help me determine what could be the cause of my problem, after many days of searching and testing, I have just gotten confused more.

I have a 2000 S10 2.2 L engine. I'm getting a no crank no start issue, so far what I have done, I replaced the Neutral safety switch, still nothing when turning the key, everyone lights up but starter wont turn over.

I tested from the igntion to the crank fuse, i get a light on my tester> from there I test the Purple\White wire on the Neutral Saftey switch. Here is the crazy part, I get a light, but when I touch the purple\white wire with my test light, the starter kicks over.

I even tested from the starter relay and I get light as well, I jumped the pins and tested that way.

But when I test the S post on the starter when turning the key no light.

Any tips would be helpful!

Thanks

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.