Solid Halos/Flashing Halos

Home / the12volt's Install Bay / Relays / Solid Halos/Flashing Halos

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tangoalpha10224

Member - Posts: 1

Joined: April 24, 2017

Location: Virginia, United States

Posted: April 24, 2017 at 7:07 AM / IP Logged

I have replaced the OEM headlamps to a set of aftermarket HALO/Projection Headlamps. The vehicle does NOT have DRL, and is running a constant 12V (2004 4Runner). The goal I am striving for is for the HALOs to be illuminated when the car is on, and flash in sequence with the turn indicators. I found the wiring of "pulsed to constant" and have incorporated that into my schematic, but here is the challenge. I have very minimal electrical knowledge and I need to know the Values of the resistor/capacitors so I can order the right ones.

Many Thanks in advance!!

Solid Halos/Flashing Halos - Last Post -- posted image.

Retired Navy Chief

Back to Top

Search for other posts by tangoalpha10224

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.