amp grounding

Home / the12volt's Install Bay / Car Audio / amp grounding (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: June 06, 2003 at 9:52 AM / IP Logged

if you are using a 0 guage possitive why are you using a ten guage ground. your killing the fact that you spent the time to run 0 guage wire.. i mean its ok to use 10 guage wire. but use 0 or four gauge into a distribution block and have either 4, 8 guage wire out to the amps. and well jensen ????? could be your problem.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Back to Top

ShLeY_wOb

Member - Posts: 6

Joined: February 07, 2003

Location: Australia

Posted: June 07, 2003 at 12:22 AM / IP Logged

figured out the problem to my situation. it was the amp I had 2 amps a little good one and a big old sh*tty one and i didnt wanna fuk up the good one so the first time i hooked it up i hooked it up ground first then i hooked it up positive and it sparked so i just assumed that it was my wiring not the amp. thatnx for assistance

AsH

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp grounding

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.